Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1335)

Local RADIUS Server Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 51.7
copy fdb-radius-users (to file)
Use this command to create a set of local RADIUS server users from MAC addresses in the
local FDB. A local RADIUS server user created using this command can be used for MAC
authentication.
Syntax copy fdb-radius-users {local-radius-user-db|flash|nvs|debug|tftp|scp|
} [interface <port>] [vlan <vid>] [group <name>] [export-vlan
[<group-name>]]
Mode Privileged Exec
Usage The local RADIUS server users created are written to a specified destination file in local
RADIUS user CSV (Comma Separated Values) format. The local RADIUS server users can
then be imported to a local RADIUS server using the
copy local-radius-user-db (from
file) command.
The name and password of the local RADIUS server users created use a MAC address,
which can be used for MAC authentication.
This command does not copy a MAC address learned by the CPU or the management port.
This command can filter FDB entries by the interface name and the VLAN ID. When the
interface name and the VLAN ID are specified, this command generates local RADIUS
server users from only the MAC address learned on the specified interface and on the
specified VLAN.
Parameter Description
local-radius-
user-db Copy the local RADIUS server users created to the local
RADIUS server.
flash Copy the local RADIUS server users created to Flash memory.
nvs Copy the local RADIUS server users created to NVS memory.
usb Copy the local RADIUS server users created to USB storage
device.
debug Copy the local RADIUS server users created to debug.
tftp Copy the local RADIUS server users created to the TFTP
destination.
scp Copy the local RADIUS server users created to the SCP
destination.
<url> Copy the local RADIUS server users created to the specified
URL.
interface <port> Copy only MAC addresses learned on a specified switch port.
Wildcards may be used when specifying an interface name.
vlan <vid> Copy only MAC addresses learned on a specified VLAN.
group <name> Assign a RADIUS group name to the local RADIUS server users
created.
export-vlan
<group-name> Assign a RADIUS group name to the assigned export VLAN.