Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1734)

Dynamic Host Configuration Protocol (DHCP) Commands
Software Reference for x310 Series Switches
64.36 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ip dhcp server summary
This command shows the current configuration of the DHCP server. This includes:
■ whether the DHCP server is enabled
■ whether the DHCP server is configured to ignore BOOTP requests
■ whether the DHCP server is configured to support DHCP lease queries
■ the details of any user-defined options
■ a list of the names of all DHCP address pools currently configured
This show command does not include any configuration details of the address pools. You
can display these using the
show ip dhcp pool command.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show ip dhcp server summary
Mode User Exec and Privileged Exec
Example To display the current configuration of the DHCP server, use the command:
Output Figure 64-11: Example output from the show ip dhcp server summary command
Related Commands ip dhcp pool
service dhcp-server
awplus# show ip dhcp server summary
DHCP Server service is disabled
BOOTP ignore is disabled
DHCP leasequery support is disabled
Pool list: p2