Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 304)

Logging Commands
Software Reference for x310 Series Switches
10.32 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Default By default the buffered log has a filter to select messages whose severity level is notices
(5)
or higher. This filter may be removed using the no variant of this command.
Mode Global Configuration
Examples To create a filter to send all messages generated by EPSR that have a severity of notices
or higher to the permanent log use the following commands:
To create a filter to send all messages containing the text “Bridging
initialization”
, to the permanent log use the following commands:
Validation
Commands
show log config
Related Commands default log permanent
log permanent
log permanent size
show log permanent
facility Filter messages to the permanent log by syslog facility.
<facility> Specify one of the following syslog facilities to include messages from
in the log:
kern Kernel messages
user Random user-level messages
mail Mail system
daemon System daemons
auth Security/authorization messages
syslog Messages generated internally by syslogd
lpr Line printer subsystem
news Network news subsystem
uucp UUCP subsystem
cron Clock daemon
authpriv Security/authorization messages (private)
ftp FTP daemon
msgtext Select messages containing a certain text string
<text-
string> A text string to match. This is case sensitive, and must be the last text
on the command line.
Parameter Description
awplus# configure terminal
awplus(config)# log permanent level notices program epsr
awplus# configure terminal
awplus(config)# log permanent msgtext Bridging initialization