Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1535)

EPSR Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 58.9
epsr trap
This command enables SNMP traps for an EPSR instance. The traps will be sent when the
EPSR instance changes state.
The no variant of this command disables SNMP traps for an EPSR instance. The traps will
no longer be sent when the EPSR instance changes state.
Syntax epsr trap
no epsr trap
Mode EPSR Configuration
Example To enable traps for the EPSR instance called blue, use the command:
To disable traps for the EPSR instance called blue, use the command:
Related Commands epsr mode master controlvlan primaryport
epsr mode transit controlvlan
show epsr
show debugging epsr
This command shows the debugging modes enabled for EPSR.
Syntax show debugging epsr
Mode User Exec and Privileged Exec
Example To show the enabled debugging modes, use the command:
Related Commands debug epsr
Parameter Description
instance> Name of the EPSR instance.
trap SNMP trap for the EPSR instance.
awplus(config-epsr)# epsr blue trap
awplus(config-epsr)# no epsr blue trap
awplus# show debugging epsr