Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1039

QoS Commands

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

39.33

Example

For policy-map pmap3 and class-map cmap1, set the CoS value to 2 and also set the input
to the CoS to queue map so that the traffic is assigned to egress queue 1:

Related Commands

mls qos map cos-queue to
show mls qos maps cos-queue

Table 39-1: CoS to Egress Queue Remarking Function

Input

Command

Output

CoS field = 1

Remark new-cos (not
configured)

CoS value = 1

Packet sent to egress queue 0

CoS field = 1

Remark new-cos 2 external

CoS value = 2

Packet sent to egress queue 0

CoS set to 1

Remark new-cos 2 internal

CoS value = 1

Packet sent to egress queue 1

CoS set to 1

Remark new-cos 2 both

CoS value = 2

Packet sent to egress queue 1

Note: This table assumes that the CoS to Queue map is set to its default values.

awplus#

configure terminal

awplus(config)#

policy-map pmap3

awplus(config-pmap)#

class cmap1

awplus(config-pmap-c)#

remark new-cos 2 both