Ip dns forwarding retry, Ip dns forwarding retry < 0-100 – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 652

IP Addressing and Protocol Commands
Software Reference for x310 Series Switches
25.18
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
ip dns forwarding retry
Use this command to set the number of times DNS Relay will retry to forward DNS queries.
The switch stops sending DNS requests to an unresponsive server at the time set using the
command and when all of the retries are used.
Use the no variant of this command to set the number of retries to the default of 2.
Syntax
ip dns forwarding retry <0-100>
no ip dns forwarding retry
Default
The default number of retries is 2 DNS requests to an unresponsive server.
Mode
Global Configuration
Usage
See
for more information about DNS Relay to map IPv4 and
IPv6 addresses to name servers to maintain a a database of hostname-to-address
mappings. See the
command used with this command.
Examples
To set the DNS forwarding retry count to 50 and to set the DNS forwarding dead-time to
1800
seconds, use the commands:
To reset the DNS retry count to the default of 2 and the DNS forwarding dead-time to the
default of 3600 seconds, use the commands:
Related Commands
debug ip dns forwarding
ip dns forwarding
ip dns forwarding dead-time
show ip dns forwarding
Parameter
Description
<0-100>
Set the number of times DNS Relay will retry to forward a DNS query.
awplus#
configure terminal
awplus(config)#
ip dns forwarding retry 50
awplus(config)#
ip dns forwarding dead-time 1800
awplus#
configure terminal
awplus(config)#
no ip dns forwarding retry
awplus(config)#
no ip dns forwarding dead-time