Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 642
IP Addressing and Protocol Commands
Software Reference for x310 Series Switches
25.8
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
Below is example output from the show log | include ARP_LOG command after enabling
ARP logging displaying IEEE standard format hexadecimal notation MAC addresses (HH-
HH-HH-HH-HH-HH) using the arp log mac-address format ieee command.
Below are the parameters in output of the show log | include ARP_LOG command with an
ARP log message format of <ARP_LOG> <port number> <VLAN ID> <Operation>
<MAC> <IP> after <date> <time> <severity> <hostname> <program name>
information.
Table 25-1: Parameters in output of the show log | include ARP_LOG command
Validation
Commands
Related Commands
Parameter
Description
<ARP_LOG>
Indicates ARP log entry information follows <date> <time>
<severity> <hostname> <program name> log information.
<port number> Indicates switch port number for the ARP log entry.
<VLAN ID>
Indicates the VLAN ID for the ARP log entry.
<Operation>
Indicates ‘add’ if the ARP log entry displays an ARP addition.
Indicates ‘del’ if the ARP log entry displays an ARP deletion.
<MAC>
Indicates the MAC address for the ARP log entry, either in the
default hexadecimal notation (HHHH.HHHH.HHHH) or in the IEEE
standard format hexadecimal notation (HH-HH-HH-HH-HH-HH) as
specified with the arp log or the arp log mac-address-format ieee
command.
<IP>
Indicates the IP address for the ARP log entry.