Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1941)

LLDP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 71.15
lldp reinit
This command sets the value of the reinitialization delay. This is the minimum time after
disabling LLDP on a port before it can reinitialize.
The no variant of this command sets the reinitialization delay back to its default setting.
Syntax lldp reinit <1-10>
no lldp reinit
Default The default reinitialization delay is 2 seconds.
Mode Global Configuration
Examples To set the reinitialization delay to 3 seconds, use the commands:
To set the reinitialization delay back to its default, use the commands:
Related Commands show lldp
Parameter Description
<1-10> The delay in seconds.
awplus# configure terminal
awplus(config)# lldp reinit 3
awplus# configure terminal
awplus(config)# no lldp reinit