Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 50)

Getting Started
Software Reference for x310 Series Switches
1.26 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
How to Set the Timezone
To set the timezone, enter Global Configuration mode and enter the clock timezone
command:
clock timezone {plus|minus} <0-12>
The <timezone-name> can be any string up to 6 characters long.
To return the timezone to UTC+0, enter the command:
Example To set the timezone to Eastern Standard Time, use the command:
How to Configure Summer-time
There are two approaches for setting summer-time:
■ recurring, when you specify the week when summer-time starts and ends and each
year the switch changes the time at those weeks. For example, Eastern Daylight Time
(EDT) starts at 2 am on the second Sunday in March and ends at 2 am on the first
Sunday in November.
■ date-based, when you specify the start and end dates for summer-time for a particular
year. For example, Eastern Daylight Time (EDT) starts at 2 am on Sunday, 8 March 2008
and ends at 2 am on Sunday, 2 November 2008.
Recurring To set summer-time with recurring dates, enter Global Configuration mode and enter the
clock summer-time recurring command:
clock summer-time recurring day>
<1-180>
The can be any string up to 6 characters long.
The and are in the form hh:mm, in 24-hour time.
Note that if you specify 5 for the week, this changes the time on the last day of the month,
not the 5th week.
Example To configure EDT, enter the command:
Date-based To set summer-time for a single year, enter Global Configuration mode and enter the clock
summer-time date command:
clock summer-time date
<1-180>
The <zone-name> can be any string up to 6 characters long.
The <start-time> and are in the form hh:mm, in 24-hour time.
awplus(config)# no clock timezone
awplus(config)# clock timezone EST minus 5
awplus(config)# clock summer-time EDT recurring 2 Sun Mar 02:00
1 Sun Nov 02:00 60