Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1634)

AMF Commands
Software Reference for x310 Series Switches
60.46 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show atmf diagnostics
This command displays diagnostic information for an entire AMF Network. It relies on the
ability to create a working-set, therefore if Restricted Login is enabled, the command can
only be run on an AMF master.
Syntax show atmf diagnostics [network|links|consistency]
Mode Privileged Exec
Example-1 To display network diagnostic information, use the command:
A typical output screen from this command is shown below:
Parameter Description
network Display network related diagnostic information
links Display link related diagnostic information
consistency Display working set consistency information
node2# show atmf diagnostics network
node1# show atmf diagnostics network
================================================================
show system | grep Software
================================================================
AlliedWare Plus (TM) 0.0.0 02/26/14 11:13:41
================================================================
node1, node2, node3:
================================================================
Working set join
Software version : main-5.4.4
================================================================
show atmf detail | grep Client
================================================================
AlliedWare Plus (TM) 0.0.0 02/26/14 11:13:41
================================================================
node1, node2, node3:
================================================================
Working set join
AMF-ALL Client License
: Yes
...