Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 463)

VLAN Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 17.35
vlan classifier rule ipv4
Use this command to create an IPv4 subnet-based VLAN classifier rule and map it to a
specific VLAN. Use the no variant of this command to delete the VLAN classifier rule.
Syntax vlan classifier rule <1-256> ipv4 /prefix-length> vlan
<1-4094>
no vlan classifier rule <1-256>
Mode Global Configuration
Usage If the source IP address matches the IP subnet specified in the VLAN classifier rule, the
received packets are mapped to the specified VLAN.
Example
Related Commands show vlan classifier rule
vlan classifier activate
vlan classifier rule proto
Parameter Description
<1-256> Specify the VLAN Classifier Rule identifier.
Specify the IP address and prefix length.
<1-4094> Specify a VLAN ID to which an untagged packet is
mapped in the range <1-4094>.
awplus# configure terminal
awplus(config)# vlan classifier rule 3 ipv4 3.3.3.3/8 vlan 5