Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1040)

QoS Commands
Software Reference for x310 Series Switches
39.34 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
service-policy input
Use this command to apply a policy-map to the input of an interface.
Use the no variant of this command to remove a policy-map and interface association.
Syntax service-policy input <policy-map>
no service-policy input <policy-map>
Mode Interface Configuration
Usage This command can be applied to switch ports or static channel groups, but not to dynamic
(LACP) channel groups.
Example To apply a policy-map named pmap1 to interface port1.0.2, use the commands:
Parameter Description
<policy-map> Policy map name that the input will applied to.
awplus# configure terminal
awplus(config)# interface port1.0.2
awplus(config-if)# service-policy input pmap1