Timeout (ping polling), Timeout <1-30 – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 2079

Ping-Polling Commands

Software Reference for x310 Series Switches

C613-50046-01 REV A

AlliedWare Plus

Operating System - Version 5.4.4C

79.21

timeout (ping polling)

This command specifies the time in seconds that the polling instance waits for a response
to a ping packet. You may find a higher time-out useful in networks where ping packets
have a low priority.

The no variant of this command resets the set time out to the default of one second.

Syntax

timeout <1-30>

no timeout

Default

The default is 1 second.

Mode

Ping-Polling Configuration

Examples

To specify the timeout as 5 seconds for ping-poll instance 43, use the commands:

To reset the timeout to its default of 1 second for ping-poll instance 43, use the
commands:

Related Commands

critical-interval
fail-count
normal-interval
ping-poll
sample-size
show ping-poll
up-count

Parameter

Description

<1-30>

Length of time, in seconds, that the polling instance waits for a
response from the polled device.

awplus#

configure terminal

awplus(config)#

ping-poll 43

awplus(config-ping-poll)#

timeout 5