Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2032)

Trigger Commands
Software Reference for x310 Series Switches
77.12 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
To display detailed information about all triggers, use the command:
awplus# show trigger full
Figure 77-5: Example output from the show trigger full command
awplus#show trigger full
Trigger Configuration Details
------------------------------------------------------------
Trigger ..................... 1
Description .................
Type and details ............ USB (in)
Days ........................ smtwtfs
After ....................... 00:00:00
Before ...................... 23:59:59
Active ...................... Yes
Test ........................ No
Trap ........................ Yes
Repeat ...................... Continuous
Modified .................... Fri Sep 3 14:45:56 2010
Number of activations ....... 0
Last activation ............. not activated
Number of scripts ........... 0
1.
2.
3.
4.
5.
Trigger ..................... 2
Description .................
Type and details ............ USB (out)
Days ........................ smtwtfs
After ....................... 00:00:00
Before ...................... 23:59:59
Active ...................... Yes
Test ........................ No
Trap ........................ Yes
Repeat ...................... Continuous
Modified .................... Fri Sep 3 14:45:56 2010
Number of activations ....... 0
Last activation ............. not activated
Number of scripts ........... 0
1.
2.
3.
4.
5.
Trigger ..................... 3
Description ................. Busy CPU
Type and details ............ CPU (80% up)
Days ........................ smtwtfs
Active ...................... Yes
Test ........................ No
Trap ........................ Yes
Repeat ...................... Continuous
Modified .................... Fri Feb 2 17:05:16 2007
Number of activations ....... 0
Last activation ............. not activated
Number of scripts ........... 2
1. flash:/cpu_alert.sh
2. flash:/reconfig.scp
3.
4.
5.
------------------------------------------------------------