Step 3: check the ntp configuration – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1670

Text mode
Original mode

NTP Introduction and Configuration

Software Reference for x310 Series Switches

61.6

AlliedWare Plus

Operating System - Version 5.4.4C

C613-50046-01 REV A

Step 3:

Check the NTP configuration.

Check the NTP configuration on each switch by using the command:

This command displays the following information on the Head Office switch.

awplus#

show ntp status

Clock is synchronized, stratum 0, actual frequency is 0.0000
Hz, precision is 20 reference time is 00000000.00000000
(6:28:16.000 UTC Fri Feb 7 2036)clock offset is 0.000 msec,
root delay is 0.000 msec root dispersion is 0.000 msec,