Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 743)

IGMP Snooping Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 31.5
debug igmp
Use this command to enable debugging of either all IGMP or a specific component of
IGMP.
Use the no variant of this command to disable all IGMP debugging, or debugging of a
specific component of IGMP.
Syntax debug igmp {all|decode|encode|events|fsm|tib}
no debug igmp {all|decode|encode|events|fsm|tib}
Modes Privileged Exec and Global Configuration
Usage This command applies to VLAN interfaces configured for IGMP or IGMP Snooping.
Examples
Related Commands show debugging igmp
undebug igmp
Parameter Description
all Enable or disable all debug options for IGMP
decode Debug of IGMP packets that have been received
encode Debug of IGMP packets that have been sent
events Debug IGMP events
fsm Debug IGMP Finite State Machine (FSM)
tib Debug IGMP Tree Information Base (TIB)
awplus# configure terminal
awplus(config)# debug igmp all