Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2074)

Ping-Polling Commands
Software Reference for x310 Series Switches
79.16 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ping-poll
This command displays the settings and status of ping polls.
Syntax show ping-poll [<1-100>|state {up|down}] [brief]
Mode User Exec and Privileged Exec
Output Figure 79-2: Example output from the show ping-poll brief command
Parameter Description
<1-100> Displays settings and status for the specified polling instance.
state Displays polling instances based on whether the device they are
polling is currently reachable or unreachable.
up Displays polling instance where the device state is
reachable.
down Displays polling instances where the device state is
unreachable.
brief Displays a summary of the state of ping polls, and the devices they
are polling.
Ping Poll Configuration
----------------------------------------------------------
Id Enabled State Destination
----------------------------------------------------------
1 Yes Down 192.168.0.1
2 Yes Up 192.168.0.100
Table 79-3: Parameters in output of the show ping-poll brief command
Parameter Meaning
Id The ID number of the polling instance, set when creating the polling
instance with the
ping-poll command.
Enabled
Whether the polling instance is enabled or disabled.
State The current status of the device being polled:
Up The device is reachable.
Down The device is unreachable.
Critical
Up The device is reachable but recently the polling
instance has not received some ping replies, so the
polled device may be going down.
Critical
Down The device is unreachable but the polling instance
received a reply to the last ping packet, so the polled
device may be coming back up.