Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1180)

Authentication Commands
Software Reference for x310 Series Switches
43.54 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
auth-web-server port
This command sets the HTTP port number for the web authentication server.
Use the no variant of this command to reset the HTTP port number to the default (80).
Syntax auth-web-server port <port-number>
no auth-web-server port
Default The web authentication server HTTP port number is set to 80 by default.
Mode Global Configuration
Examples To set the HTTP port number 8080 for the web authentication server, use the following
commands:
To reset to the default HTTP port number 80 for the web authentication server, use the
following commands:
Validation
Commands
show auth-web
show auth-web-server
show running-config
Parameter Description
<port-number> Set the local web authentication server port within the TCP port
number range 1 to 65535.
awplus# configure terminal
awplus(config)# auth-web-server port 8080
awplus# configure terminal
awplus(config)# no auth-web-server port