Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 113)

User Access Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 5.27
service terminal-length
Use this command to specify the number of rows of output that the device will display
before pausing, for all console and VTY lines.
Use the no variant of this command to remove the length specified by this command. The
default length will apply unless you have changed the length for some or all lines by using
the
length (asyn) command on page 5.12 .
Syntax service terminal-length <lines>
no service terminal-length >
Mode Global Configuration
Usage This command overrides any lengths set by using the length (asyn) command on page
5.12 in Line mode.
Example To display 60 rows of text before pausing, use the following command:
Related Commands service terminal-length
terminal length
terminal resize
Parameter Description
terminal-length Establish system-wide terminal length configuration.
<0-512>
Number of rows that the device will display before pausing.
awplus# configure terminal
awplus(config)# service terminal-length 60