Storm-window – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1054
QoS Commands
Software Reference for x310 Series Switches
39.48
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
storm-window
Sets the window size of QoS Storm Protection (QSP). This sets the time to poll the data-
rate every given milliseconds. Minimum window size of 100 ms and the maximum is 60
sec.
Use the no variant of this command to negate the storm-window command.
Syntax
storm-window <100-60000>
no storm-window
Default
No default
Mode
Policy Map Class Configuration
Usage
This command should be set in conjunction with the
.
Examples
To set the QSP window size to 5000 ms, use the following commands:
To negate the QSP window size set previously, use the following commands:
Related Commands
storm-action
storm-downtime
storm-protection
storm-rate
Parameter Description
<100-60000>
The window size, measured in milliseconds.
awplus#
configure terminal
awplus(config)#
policy-map pmap2
awplus(config-pmap)#
class cmap2
awplus(config-pmap-c)#
storm-window 5000
awplus#
configure terminal
awplus(config)#
policy-map pmap2
awplus(config-pmap)#
class cmap2
awplus(config-pmap-c)#
storm-window 5000