Command list, Banner exec, Command list banner exec – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 202

System Configuration and Monitoring Commands

Software Reference for x310 Series Switches

8.2

AlliedWare Plus

Operating System - Version 5.4.4C

C613-50046-01 REV A

Command List

This chapter provides an alphabetical reference of commands for configuring and
monitoring the system.

banner exec

This command configures the User Exec mode banner that is displayed on the console
after you login. The banner exec default command restores the User Exec banner to the
default banner. Use the no banner exec command to disable the User Exec banner and
remove the default User Exec banner.

Syntax

banner exec <banner-text>

banner exec default

no banner exec

Default

By default, the AlliedWare Plus

version and build date is displayed at console login, such

as:

Mode

Global Configuration

Examples

To configure a User Exec mode banner after login, enter the following commands:

To restore the default User Exec mode banner after login, enter the following commands:

AlliedWare Plus (TM) 5.4.4 03/31/14 00:44:25

awplus#configure terminal

awplus(config)#banner exec enable to move to Priv Exec mode

awplus(config)#exit

awplus#exit

awplus login: manager

Password:

enable to move to Priv Exec mode

awplus>