Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 955)

IPv6 Software Access Control List (ACL) Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 37.3
IPv6 Software Access List Commands and
Prompts
Many of the ACL commands operate from sub-modes that are specific to particular ACL
types. The table
“IPv6 Software Access List Commands and Prompts” shows the CLI
prompts at which ACL commands are entered.
Table 37-1: IPv6 Software Access List Commands and Prompts
Command Name Command Mode Prompt
show ipv6 access-list (IPv6
Software ACLs) Privileged Exec
awplus#
ipv6 access-list extended (named) Global Configuration
awplus(config)#
ipv6 access-list standard (named) Global Configuration
awplus(config)#
(ipv6 access-list extended IP
protocol filter) IPv6 Extended ACL
Configuration
awplus(config-ipv6-ext-acl)#
(ipv6 access-list extended TCP UDP
filter) IPv6 Extended ACL
Configuration
awplus(config-ipv6-ext-acl)#
(ipv6 access-list standard filter) IPv6 Standard ACL
Configuration
awplus(config-ipv6-std-acl)#