Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual

Page 1830

SNMP MIBs

Software Reference for x310 Series Switches

69.18

AlliedWare Plus

Operating System - Version 5.4.4C

C613-50046-01 REV A

atDhcpsnVioType

{ atDhcpsnVariablesEntry
10 }

The reason that the trap was generated.

■

invalidBootp(1) indicates that the received BOOTP
packet was invalid. For example, it is neither
BootpRequest nor BootpReply.

■

invalidDhcpAck(2) indicates that the received DHCP
ACK was invalid.

■

invalidDhcpRelDec(3) indicates the DHCP Release or
Decline was invalid.

■

invalidIp(4) indicates that the received IP packet was
invalid.

■

maxBindExceeded(5) indicates that if the entry was
added, the maximum bindings configured for the
port would be exceeded.

■

opt82InsertErr(6) indicates that the insertion of
Option 82 failed.

■

opt82RxInvalid(7) indicates that the received
Option 82 information was invalid.

■

opt82RxUntrusted(8) indicates that Option 82
information was received on an untrusted port.

■

opt82TxUntrusted(9) indicates that Option 82
would have been transmitted out an untrusted port.

■

replyRxUntrusted(10) indicates that a BOOTP Reply
was received on an untrusted port.

■

srcMacChaddrMismatch(11) indicates that the
source MAC address of the packet did not match the
BOOTP CHADDR of the packet.

■

staticEntryExisted(12) indicates that the static entry
to be added already exists.

■

dbAddErr(13) indicates that adding an entry to the
database failed.

atArpsecVariablesTable

{ atDhcpsn 2 }

The ARP Security table. This table contains rows of
DHCP Snooping ARP Security information.

atArpsecVariablesEntry

{ atArpsecVariablesTable 1 }

A set of parameters that describe the DHCP Snooping
ARP Security features.

atArpsecIfIndex

{ atArpsecVariablesEntry 1 }

Ifindex of the port that the ARP packet was received on.

atArpsecClientIP

{ atArpsecVariablesEntry 2 }

Source IP address of the ARP packet.

atArpsecSrcMac

{ atArpsecVariablesEntry 3 }

Source MAC address of the ARP packet.

atArpsecVid

{ atArpsecVariablesEntry 4 }

VLAN ID of the port that the ARP packet was received
on.

Table 69-6: Objects defined in AT-DHCPSN-MIB(cont.)

Object Object

Identifier

Description