Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 399)

Switching Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 15.37
show platform port
This command displays the various port registers or platform counters for specified
switchports.
Syntax show platform port [<port-list>|counters]
Mode Privileged Exec
Examples To display port registers for port1.0.1 and port1.0.2 use the following command:
To display platform counters for port1.0.1 and port1.0.2 use the following
command:
Parameter Description
The ports to display information about. A port-list can be:
■ a continuous range of ports separated by a hyphen,
e.g. port1.0.1-1.0.6
■ a comma-separated list of ports and port ranges,
e.g. port1.0.1,port1.0.4-1.0.6.
counters Show the platform counters.
awplus# show platform port port1.0.1-port1.0.2
awplus# show platform port port1.0.1-port1.0.2 counters