Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 173)

File Management Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 7.27
move debug
This command moves a specified debug file to a destination debug file.
Specify whether the destination is Flash or USB when saving the software to the local
filesystem.
Syntax move debug {<destination-url>|debug|flash|nvs|usb}
{<source-url>|debug|flash|nvs|usb}
Mode Privileged Exec
Example To move debug output onto a USB storage device with a filename my-debug, use the
following command:
Output Figure 7-4: CLI prompt after entering the move debug command
Related Commands copy debug
delete debug
pwd
This command prints the current working directory.
Syntax pwd
Mode Privileged Exec
Example To print the current working directory, use the command:
Related Commands cd
Parameter Description
The URL where you would like the debug output moved to.
See
“URL Syntax and Keyword Usage” on page 7.3 for
valid URL syntax.
The URL where the debug output originates. See “URL
Syntax and Keyword Usage” on page 7.3 for valid URL
syntax.
awplus# move debug usb:my-debug
Enter source file name []:
awplus# pwd