Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1046)

QoS Commands
Software Reference for x310 Series Switches
39.40 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show mls qos interface queue-counters
This command displays an interface’s egress queue counters. This can either be for a
specific queue or for all queues on the interface. If no queue is specified all queue counters
on the interface will be displayed.
The counters show the number of frames currently in the queue and the maximum
number of frames allowed in the queue, for individual egress queues and the port’s queue
(which will be a sum of all egress queues).
Syntax show mls qos interface <port> queue-counters [queue <0-7>]
Mode User Exec and Privileged Exec
Example To show the counters for all queues on port1.0.1, use the command:
Output Figure 39-5: Example output from the show mls qos interface queue-counters
command
Table 39-3: Parameters in the output of the show mls qos interface queue-counters
command
Parameter Description
<port> Switch port.
<0-7> Queue.
awplus# show mls qos interface port1.0.1 queue-counters
Interface port1.0.4 Queue Counters:
Port queue length 1169
Egress Queue length:
Queue 0 0
Queue 1 0
Queue 2 1169
Queue 3 0
Queue 4 0
Queue 5 0
Queue 6 0
Queue 7 0
Parameter Description
Interface Port we are showing the counters for.
Port queue length Number of frames in the port’s queue. This will be the
sum of all egress queues on the port.
Egress Queue length Number of frames in a specific egress queue.