Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 197)

File Management Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 7.51
show startup-config
This command displays the contents of the start-up configuration file, which is the file that
the device runs on start-up.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show startup-config
Mode Privileged Exec
Example To display the contents of the current start-up configuration file, use the command:
Output Figure 7-26: Example output from the show startup-config command
Related Commands boot config-file backup
copy running-config
copy startup-config
erase startup-config
show boot
awplus# show startup-config
awplus#show startup-config
!
service password-encryption
!
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
!
no service ssh
!
service telnet
!
service http
!
no clock timezone
.
.
.
line con 0
line vty 0 4
!
end