Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 931)

IPv4 Software Access Control List (ACL) Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 35.45
Table 35-5: Parameters in the show dos interface command output:
Related Commands dos
Type of DoS
attack
Description
Port status Displays Enabled when the port is configured as being
administratively up after issuing the no shutdown command.
Displays Disabled when the port is configured as being
administratively down with the shutdown command.
ipoptions Displays Enabled when the ipoptions parameter is configured
with the
dos command, plus the action (Shutdown port,
Mirror port , or Trap port) and the number of instances
of any ipoptions DoS attacks that have occurred on the
interface.
Displays Disabled when the ipoptions parameter is not
configured with the
dos command.
land Displays Enabled when the land parameter is configured with
the
dos command, plus the action (Shutdown port, Mirror
port , or Trap port) and the number of instances of any land
DoS attacks that have occurred on the interface.
Displays Disabled when the land parameter is not configured
with the
dos command.
ping-of-death Displays Enabled when the ping-of-death parameter is
configured with the
dos command, plus the action (Shutdown
port , Mirror port, or Trap port) and the number of
instances of any ping-of-death DoS attacks that have occurred
on the interface.
Displays Disabled when the ping-of-death parameter is not
configured with the
dos command.
smurf Displays Enabled when the smurf parameter is configured
with the
dos command, plus the action (Shutdown port,
Mirror port , or Trap port) and the number of instances
of any smurf DoS attacks that have occurred on the interface.
Displays Disabled when the smurf parameter is not
configured with the
dos command.
synflood Displays Enabled when the synflood parameter is configured
with the
dos command, plus the action (Shutdown port,
Mirror port , or Trap port) and the number of instances
of any synflood DoS attacks that have occurred on the interface.
Displays Disabled when the synflood parameter is not
configured with the
dos command.
teardrop Displays Enabled when the teardrop parameter is configured
with the
dos command, plus the action (Shutdown port,
Mirror port , or Trap port) and the number of instances
of any teardrop DoS attacks that have occurred on the interface.
Displays Disabled when the teardrop parameter is not
configured with the
dos command.