Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1301)

TACACS+ Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 49.5
tacacs-server timeout
Use this command to specify the TACACS+ global timeout value. The timeout value is how
long the device waits for a reply to a TACACS+ request before considering the server to be
dead.
Note that this command configures the timeout parameter for TACACS+ servers globally.
The no variant of this command resets the transmit timeout to the default (5 seconds).
Syntax tacacs-server timeout
no tacacs-server timeout
Default The default timeout value is 5 seconds.
Mode Global Configuration
Examples To set the timeout value to 3 seconds, use the following commands:
To reset the timeout period for TACACS+ servers to the default, use the following
commands:
Related Commands tacacs-server host
show tacacs+
Parameter Description
<seconds> TACACS+ server timeout in seconds, in the range 1 to 1000.
awplus# configure terminal
awplus(config)# tacacs-server timeout 3
awplus# configure terminal
awplus(config)# no tacacs-server timeout