Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1856)

SNMP MIBs
Software Reference for x310 Series Switches
69.44 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
licenseNewName { licenseNew 2 } The name of the new license to be installed.
licenseNewKey { licenseNew 3 } The key for the new license to be installed.
licenseNewInstall { licenseNew 4 } Used to install new licenses. Values can be:
1. true (1)
2. false (2)
To commence installation, a valid license name and
key must first have been set via the
licenseNewName and licenseNewKey respectively.
This object should then be set to the value true (1). If
either the license name or key is invalid, the write
operation will fail.
Once installed, the software modules affected by
any newly enabled features will automatically be
restarted.
Note that a stacked device that has a new license
installed on it may not be able to rejoin the stack
after reboot, unless the license is also added to all
other devices in the stack.
When read, the object will always return the value
false (2).
licenseNewInstallStatus { licenseNew 5 } The current status of the last license installation
request.
One of the following values is returned when
reading this object:
■
idle (1)
■
processing (2)
■ success (3)
■ failed (4)
When a stack license installation operation is
complete the first read of this object will return
either a success (3) or a failure (4) indication.
Subsequent reads of this object will then return an
idle (1) indication.
Table 69-11: Objects defined in AT-LICENSE-MIB(cont.)
Object Object Identifier Description