Trigger, Trigger < 1-250, No trigger < 1-250 – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 2039
Trigger Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
77.19
trigger
This command is used to access the Trigger Configuration mode for the specified trigger.
Once Trigger Configuration mode has been entered the trigger type information can be
configured and the trigger scripts and other operational parameters can be specified. At a
minimum the trigger type information must be specified before the trigger can become
active.
The no variant of this command removes a specified trigger and all configuration
associated with it.
Syntax
trigger <1-250>
no trigger <1-250>
Mode
Global Configuration
Examples
To enter trigger configuration mode for trigger 12 use the command:
To completely remove all configuration associated with trigger 12, use the command:
Related Commands
Parameter
Description
<1-250>
A trigger ID.
awplus#
trigger 12
awplus#
no trigger 12