Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 2150)

Stacking Commands
Software Reference for x310 Series Switches
83.10 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show provisioning (stack)
Use this command to display the provisioning status of all installed or provisioned
hardware. Provisioning is the preconfiguration necessary to accommodate future
connection of hardware items such as a switch.
Syntax show provisioning
Mode User Exec and Privileged Exec
Example To show provisioning, use the following command:
Output Figure 83-4: Example output from the show provisioning command
Table 83-2: Parameters in the output of the show provisioning command
Related Commands show stack
switch provision (stack)
awplus# show provisioning
Switch provisioning summary information
Switch provisioning summary information
ID Board class Status
1.0 x310-26 Hardware present
Parameter Description
ID The unit.bay-location of the hardware provision.
Board class The hardware type.
Status The provisioned state:
■ Hardware Present means that the hardware is currently
installed in the stack.
■ Provisioned means that although the hardware is not
currently installed; the stack is preconfigured ready to
accept the hardware installation.