Show log permanent – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 314
Logging Commands
Software Reference for x310 Series Switches
10.42
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
show log permanent
This command displays the contents of the permanent log.
When used within a stacked environment, this command will display the contents of the
permanent log for all the stack members, unless you specify a particular stack member.
Syntax
show log permanent[
Default
If the optional tail parameter is specified only the latest 10 messages in the permanent
log are displayed. A numerical value can be specified after the tail parameter to select
how many of the latest messages should be displayed.
Mode
User Exec, Privileged Exec and Global Configuration
Example
To display the permanent log of stack member 2, use the command:
Output
Figure 10-6: Example output from the show log permanent command
Related Commands
Parameter
Description
Stack member number, from 1 to 4.
tail
Display only the latest log entries.
<10-250>
Specify the number of log entries to display.
awplus#
show log permanent 2
awplus#show log permanent 2
Stack member 2:
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.51 hotswapped
in: AT-StackXS/1.0
2014 Feb 25 09:10:48 daemon.crit awplus-2 HPI: HOTSWAP Pluggable 2.0.52 hotswapped
in: 2127931-2
2014 Feb 25 09:10:50 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has
joined the stack
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Member 1 (eccd.6d7d.a50e) has
become the Active Master
2014 Feb 25 09:10:52 local6.alert awplus-2 VCS[922]: stack member has booted from
non-default location, SW version auto synchronization cannot be supported.
2014 Feb 25 09:10:52 user.crit awplus-2 VCS[922]: Stack Virtual MAC is
0000.cd37.0002
2014 Feb 25 09:11:46 user.crit awplus-2 ATMF[862]: awplus-x
310 has joined. 1
member in total.