Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 960)

IPv6 Software Access Control List (ACL) Commands
Software Reference for x310 Series Switches
37.8 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
ipv6 access-list extended proto
Use this command when configuring an IPv6 extended access-list for filtering frames that
permit or deny packets with a specific value based on the IP protocol number specified.
The no variant of this command removes a specified IPv6 extended access-list with an IP
protocol number.
Syntax ipv6 access-list extended <list-name>
{deny|permit} proto <ip-protocol>}
{<ipv6-source-address/prefix>|any}
{<ipv6-destination-address/prefix>|any} [log]
no ipv6 access-list extended <list-name>
{deny|permit} proto <ip-protocol>
{<ipv6-source-address/prefix>|any}
{<ipv6-destination-address/prefix>|any} [log]
Parameter Description
<list-name> A user-defined name for the IPv6 software extended access-
list.
deny Specifies the packets to reject.
permit Specifies the packets to accept.
proto The IP Protocol type specified by it protocol number <1-
255>.
The IP protocol number, as defined by IANA (Internet
Assigned Numbers Authority
http://www.iana.org/
assignments/protocol-numbers ).
Protocol Number
1
2
3
4
5
6
8