Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1359)

Local RADIUS Server Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 51.31
show radius local-server nas
Use this command to display information about NAS (Network Access Servers) registered
to the local RADIUS server.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show radius local-server nas []
Mode User Exec and Privileged Exec
Example The following command displays NAS information.
Output
Related Commands nas
Parameter Description
Specify NAS IP address for show output.
awplus# show radius local-server nas
Figure 51-6: Example output from the show radius local-server nas command
NAS-Address Shared-Key
----------------------------------------------------------
127.0.0.1 awplus-local-radius-server
Table 51-6: Parameters in the output of the show radius local-server nas command
Parameter Description
NAS-Address
IP address of NAS.
Shared-Key
Shared key used for RADIUS connection.