Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1786)

SNMP Commands
Software Reference for x310 Series Switches
68.4 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
inBadCommunityNames The number of messages received by the SNMP agent
with an unrecognized SNMP community name. It drops
these messages.
inBadCommunityUses The number of messages received by the SNMP agent
where the requested SNMP operation is not permitted
from SNMP managers using the SNMP community
named in the message.
inASNParseErrs The number of ASN.1 or BER errors that the SNMP agent
has encountered when decoding received SNMP
Messages.
inTooBigs The number of SNMP PDUs received by the SNMP agent
where the value of the error-status field is ‘tooBig'. This
is sent by an SNMP manager to indicate that an
exception occurred when processing a request from the
agent.
inNoSuchNames The number of SNMP PDUs received by the SNMP agent
where the value of the error-status field is
‘noSuchName'. This is sent by an SNMP manager to
indicate that an exception occurred when processing a
request from the agent.
inBadValues The number of SNMP PDUs received by the SNMP agent
where the value of the error-status field is ‘badValue'.
This is sent by an SNMP manager to indicate that an
exception occurred when processing a request from the
agent.
inReadOnlys The number of valid SNMP PDUs received by the SNMP
agent where the value of the error-status field is
‘readOnly'. The SNMP manager should not generate a
PDU which contains the value ‘readOnly' in the error-
status field. This indicates that there is an incorrect
implementations of the SNMP.
inGenErrs The number of SNMP PDUs received by the SNMP agent
where the value of the error-status field is ‘genErr'.
inTotalReqVars The number of MIB objects that the SNMP agent has
successfully retrieved after receiving valid SNMP
Get-Request and Get-Next PDUs.
inTotalSetVars The number of MIB objects that the SNMP agent has
successfully altered after receiving valid SNMP Set-
Request PDUs.
inGetRequests The number of SNMP Get-Request PDUs that the SNMP
agent has accepted and processed.
inGetNexts The number of SNMP Get-Next PDUs that the SNMP
agent has accepted and processed.
inSetRequests The number of SNMP Set-Request PDUs that the SNMP
agent has accepted and processed.
inGetResponses The number of SNMP Get-Response PDUs that the
SNMP agent has accepted and processed.
inTraps The number of SNMP Trap PDUs that the SNMP agent
has accepted and processed.
outPkts The number of SNMP Messages that the SNMP agent
has sent.
outTooBigs The number of SNMP PDUs that the SNMP agent has
generated with the value ‘tooBig’ in the error-status
field. This is sent to the SNMP manager to indicate that
an exception occurred when processing a request from
the manager.
Table 68-1: Parameters in the output of the show counter snmp-server command
Parameter Meaning