Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1305)

Local RADIUS Server Introduction and Configuration
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 50.3
Add the Local RADIUS Server as a RADIUS Server
Although the switch is automatically defined as a NAS (Network Access Server) for the
Local RADIUS Server, you must manually add the Local RADIUS Server to the server list
defined for the Local RADIUS Client.
Use the following commands to add the Local RADIUS Server as a RADIUS Server. The
Local RADIUS Client can then send authentication requests to its Local RADIUS Server:
Add authenticators to the list of authenticators
Authenticators can send authentication requests to the Local RADIUS Server.
Use the following commands to add other authenticators to the list of authenticators.
awplus# configure terminal
awplus(config)# radius-server host 127.0.0.1 key awplus-local-
radius-server
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# nas <nas-ip-address> key <nas-keystring>