Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1331)

Local RADIUS Server Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 51.3
Usage For the Standard attributes, the attribute may be specified using either the attribute name,
or its numeric identifier. For example, command:
will produce the same results as command:
In the same way, where the specific attribute has a pre-defined value, the parameter
may be substituted with the Value Name or with its numeric value, for example
command:
will produce the same results as command:
or command:
Examples To check a list of all available defined RADIUS attribute names, use the following
commands:
A list of Vendor-specific Attributes displays after the list of defined Standard Attributes.
awplus(config-radsrv-group)# attribute acct-terminate-cause
help
awplus(config-radsrv-group)# attribute 49 help
awplus(config-radsrv-group)# attribute acct-terminate-cause
user-request
awplus(config-radsrv-group)# attribute 49 1
awplus(config-radsrv-group)# attribute acct-terminate-cause 1
awplus# configure terminal
awplus(config)# radius-server local
awplus(config-radsrv)# group Admin
awplus(config-radsrv-group)# attribute help