Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1805)

SNMP Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 68.23
Mode Global Configuration
Examples To configure the device to send generated traps to the IPv4 host destination 192.0.2.5
with the SNMPv2c community name public, use the following command:
To configure the device to send generated traps to the IPv6 host destination
2001:db8::8a2e:7334
with the SNMPv2c community name private, use the
following command:
To remove a configured trap host of 192.0.2.5 with the SNMPv2c community name public,
use the following command:
Related Commands snmp trap link-status
snmp-server enable trap
snmp-server view
priv Encryption.
<community-name> The SNMPv1 or SNMPv2c community name.
<user-name> SNMPv3 user name.
Parameter(cont.) Description(cont.)
awplus# configure terminal
awplus(config)# snmp-server host 192.0.2.5 version 2c public
awplus# configure terminal
awplus(config)# snmp-server host 2001:db8::8a2e:7334 version 2c
private
awplus# configure terminal
awplus(config)# no snmp-server host 192.0.2.5 version 2c public