Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 744)

IGMP Snooping Commands
Software Reference for x310 Series Switches
31.6 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
ip igmp
Use this command to enable IGMP on an interface. The command configures the device as
an IGMP querier.
Use the no variant of this command to return all IGMP related configuration to the default
on this interface.
Syntax ip igmp
no ip igmp
Default Disabled
Mode Interface Configuration for a VLAN interface.
Usage This command can only be configured on VLAN interfaces, and will have no effect on
IGMP Snooping configuration.
Ensure your VLAN is configured first: see Chapter 16, Configuring VLANs .
Example
Validation
Commands
show ip igmp interface
show running-config
Note An IP address must be assigned to the VLAN first, before this command will
work.