Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 784)

IGMP Snooping Commands
Software Reference for x310 Series Switches
31.46 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ip igmp snooping statistics
Use this command to display IGMP Snooping statistics data.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show ip igmp snooping statistics interface <interface-range>
[group [<ip-address>]]
Mode User Exec and Privileged Exec
Example To display IGMP statistical information for vlan1 and vlan2, use the command:
Output Figure 31-6: Example output from the show ip igmp snooping statistics command
undebug igmp
This command applies the functionality of the no debug igmp command on page 31.5 .
Parameter Description
Optionally specify the address of the multicast group, entered in
the form A.B.C.D.
Specify the name of the VLAN interface or interface range.
awplus# show ip igmp snooping statistics interface
vlan1-vlan2
IGMP Snooping statistics for vlan1
Interface: port1.0.3
Group: 224.1.1.1
Uptime: 00:00:09
Group mode: Exclude (Expires: 00:04:10)
Last reporter: 10.4.4.5
Source list is empty
IGMP Snooping statistics for vlan2
Interface: port1.0.4
Group: 224.1.1.2
Uptime: 00:00:19
Group mode: Exclude (Expires: 00:05:10)
Last reporter: 10.4.4.6
Source list is empty