Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 740)

IGMP Snooping Commands
Software Reference for x310 Series Switches
31.2 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
Introduction
The Internet Group Management Protocol (IGMP) module includes IGMP Snooping
functionality. Some of the following commands may have commonalities and restrictions.
These are described under the Usage section for each command.
Command List
This chapter provides an alphabetical reference of configure, clear, and show commands
related to Internet Group Management Protocol (IGMP) and IGMP Snooping.
clear ip igmp
Use this command to clear all IGMP group membership records on all VLAN interfaces.
Syntax clear ip igmp
Mode Privileged Exec
Usage This command applies to VLAN interfaces configured for IGMP or IGMP Snooping.
This command applies to VLAN interfaces configured for IGMP, IGMP Snooping, or IGMP
Proxy.
Example
Validation
Commands
show ip igmp interface
show running-config
Related Commands clear ip igmp group
clear ip igmp interface
awplus# clear ip igmp