Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 643)

IP Addressing and Protocol Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 25.9
clear arp-cache
This command deletes dynamic ARP entries from the ARP cache. You can optionally
specify the IPv4 address of an ARP entry to be cleared from the ARP cache.
Syntax clear arp-cache [<ip-address>]
Mode Privileged Exec
Usage To display the entries in the ARP cache, use the show arp command. To remove static ARP
entries, use the no variant of the arp (IP address MAC) command on page 25.5 .
Example To clear all dynamic ARP entries, use the command:
To clear all dynamic ARP entries associated with the IPv4 address 192.168.1.1, use the
command:
Related Commands
arp-mac-disparity
arp (IP address MAC)
show arp
clear ip dns forwarding cache
Use this command to clear the DNS Relay name resolver cache.
Syntax clear ip dns forwarding cache
Mode Privileged Exec
Examples To clear all cached data, use the command:
Related Commands ip dns forwarding cache
awplus# clear arp-cache
awplus# clear arp-cache 192.168.1.1
awplus# clear ip dns forwarding cache