Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 232)

System Configuration and Monitoring Commands
Software Reference for x310 Series Switches
8.32 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show ecofriendly
This command displays the switch’s eco-friendly configuration status. The ecofriendly led
and ecofriendly lpi configuration status are shown in the show ecofriendly output.
Syntax show ecofriendly
Mode Privileged Exec and Global Configuration
Example To display the switch’s eco-friendly configuration status, use the following command:
Output Figure 8-6: Example output from the show ecofriendly command
Related Commands ecofriendly led
ecofriendly lpi
awplus# show ecofriendly
awplus#show ecofriendly
Front panel port LEDs normal
Energy efficient ethernet
Port Name Configured Status
port1.0.1 Port 1 lpi lpi
port1.0.2 lpi lpi
port1.0.3 lpi lpi
port1.0.4 off off
port1.0.5 lpi off
port1.0.6 Port 6 off off
port1.0.7 off -
port1.0.8 off -
port1.0.9 off -
port1.0.10 off -
...
Table 8-3: Parameters in the output of the show ecofriendly command
Parameter Description
normal
The eco-friendly LED feature is disabled and port LEDs
show the current state of the ports. This is the default
setting.
off
The eco-friendly LED feature is enabled and power to
the port LEDs is disabled.
normal (configuration
overridden by eco
button)
The eco-friendly LED feature has been disabled with
the eco-switch button, overriding the configuration
set with the
ecofriendly led command. The port LEDs
show the current state of the ports.
off (configuration
overridden by eco
button)
The eco-friendly LED feature has been enabled with
the eco-switch button, overriding the configuration
set with the
ecofriendly led command. Power to the
port LEDs is disabled.
Port
Displays the port number as assigned by the switch.
Name
Displays the port name if a name is configured for a
port number.
Configured
The eco-friendly LPI feature is configured on the port.
Either lpi or off is displayed.
Status
The eco-friendly LPI feature is active on the port. Either
lpi or off is displayed. Ports that are not running show -