Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 579)

Link Aggregation Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 21.13
show etherchannel detail
Use this command to display detailed information about all LACP channels.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show etherchannel detail
Mode User Exec and Privileged Exec
Example
Output Figure 21-5: Example output from the show etherchannel detail command
show etherchannel summary
Use this command to display a summary of all LACP channels.
For information on output options, see “Controlling “show” Command Output” on
page 1.37 .
Syntax show etherchannel summary
Mode User Exec and Privileged Exec
Example
Output Figure 21-6: Example output from the show etherchannel summary command
awplus# show etherchannel detail
% Aggregator po1 (4501)
% Mac address: 00:00:cd:24:fd:29
% Admin Key: 0001 - Oper Key 0001
% Receive link count: 1 - Transmit link count: 0
% Individual: 0 - Ready: 1
% Partner LAG: 0x8000,00-00-cd-24-da-a7
% Link: port1.0.1 (5001) disabled
% Link: port1.0.2 (5002) sync: 1
% Aggregator po2 (4502)
% Mac address: 00:00:cd:24:fd:29
% Admin Key: 0002 - Oper Key 0002
% Receive link count: 1 - Transmit link count: 0
% Individual: 0 - Ready: 1
% Partner LAG: 0x8000,00-00-cd-24-da-a7
% Link: port1.0.6 (5007) disabled
awplus# show etherchannel summary
% Aggregator po1
% Admin Key: 0001 - Oper Key 0001
% Link: port1.0.1 (5001) disabled
% Link: port1.0.2 (5002) sync: 1
% Aggregator po2
% Admin Key: 0002 - Oper Key 0002
% Link: port1.0.6 (5007) disabled