Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 947
IPv6 Hardware Access Control List (ACL) Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
36.15
copy-to-mirror
Specifies the packets to copy to the mirror port.
tcp
Specifies a TCP packet.
udp
Specifies a UDP packet.
<ipv6-source-prefix/
prefix-length>
Specifies the source address with mask.
The IPv6 address prefix uses the format X:X::/
prefix-length. The prefix-length is usually set
between 0 and 64.
<ipv6-source-address>
Specifies the source address.
The IPv6 address uses the format X:X::X:X.
<ipv6-source-wildcard>
Specifies the Source Wildcard bits in IPv6 format
X:X::X:X.
host <ipv6-source-host>
Specifies the a single source host.
The IPv6 address uses the format X:X::X:X.
any
Specifies any Source host. An abbreviation for the
IPv6 prefix
::/0.
eq
Equal to.
lt
Less than.
gt
Greater than.
ne
Not equal to.
<sourceport>
The source port number, specified as an integer
between 0 and 65535.
<destport>
The destination port number, specified as an
integer between 0 and 65535.
range
Range of port numbers. Match only packets
within range.
<start-range>
The port number at the start of the range
<0-65535>
.
<end-range>
The port number at the end of the range
<0-65535>
.
<ipv6-dest-prefix/
prefix-length>
Specify destination address with mask.
The IPv6 address prefix uses the format X:X::/
prefix-length. The prefix-length is usually set
between 0 and 64.
<ipv6-destination-
address>
Specify destination address.
The IPv6 address uses the format X:X::X:X.
<ipv6-destination-
wildcard>
Specify destination wildcard bits in IPv6 format
X:X::X:X
.
host
<ipv6-destination-host>
Specify a single destination host address.
The IPv6 address uses the format X:X::X:X.
Parameter(cont.)
Description(cont.)