Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 1188)

Authentication Commands
Software Reference for x310 Series Switches
43.62 AlliedWare Plus TM Operating System - Version 5.4.4C C613-50046-01 REV A
show auth two-step supplicant brief
This command displays the supplicant state of the two-step authentication feature on the
interface.
Syntax show auth two-step supplicant [interface <ifrange>] brief
Mode Privileged Exec
Usage Do not mix interface types in a list. The specified interfaces must exist.
Example To display the supplicant state of the two-step authentication feature, enter the
command:
Output Figure 43-1: Example output from the show auth two-step supplicant brief
command
Related Commands auth two-step enable
Parameter Description
interface The interface selected for display.
<ifrange> The interface which can be specified as <ifrange>
- Switch port (e.g. port1.0.12)
- Static channel group (e.g. sa3)
- Dynamic (LACP) channel group (e.g. po4)
awplus# show two-step supplicant interface
port1.0.12 brief
interface port1.0.12
authenticationMethod: dot1x/mac
Two-Step Authentication:
firstMethod:mac
secondMethod:dot1x
totalSupplicantNum: 1
authorizedSupplicantNum: 1
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 1
webBasedAuthenticationSupplicantNum: 0
otherAuthenticationSupplicantNum: 0
Interface VID Mode MAC Address Status FirstStep SecondStep
========== === ==== =========== ====== ========= ==========
port1.0.12 1 D 000b..db67.00f7 Authenticated Pass Pass