Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) - Manual (Page 83)

CLI Navigation Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A AlliedWare Plus TM Operating System - Version 5.4.4C 4.5
The following example shows the enable command enabling access the Privileged Exec
mode for users with a privilege level of 7 or greater. Users with a privilege level of 7 or
greater do not need to enter a password to access Privileged Exec mode. Users with a
privilege level 6 or less need to enter a password to access Privilege Exec mode. Use the
enable password command or the enable secret commands to set the password to
enable access to Privileged Exec mode.
Related Commands disable (Privileged Exec mode)
enable password
enable secret
exit
service password-encryption
username
awplus> enable 7
awplus#