Introduction, Command list, Clear line console – Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 88: Clear line vty, Introduction command list

User Access Commands
Software Reference for x310 Series Switches
5.2
AlliedWare Plus
TM
Operating System - Version 5.4.4C
C613-50046-01 REV A
Introduction
This chapter provides an alphabetical reference of commands used to configure user
access.
Command List
clear line console
This command resets a console line. If a terminal session exists on the line then the
terminal session is terminated. If console line settings have changed then the new settings
are applied.
Syntax
clear line console 0
Mode
Privileged Exec
Example
To reset the console line (asyn), use the command:
Related Commands
clear line vty
flowcontrol hardware (asyn/console)
line
clear line vty
This command resets a VTY line. If a session exists on the line then it is closed.
Syntax
clear line vty <0-32>
Mode
Privileged Exec
Example
To reset the first vty line, use the command:
Related Commands
awplus#
clear line console 0
% The new settings for console line 0 have been
applied
Parameter
Description
<0-32>
Line number
awplus#
clear line vty 1