Allied Telesis AlliedWare Plus Operating System Version 5.4.4C (x310-26FT,x310-26FP,x310-50FT,x310-50FP) User Manual
Page 1723
Dynamic Host Configuration Protocol (DHCP) Commands
Software Reference for x310 Series Switches
C613-50046-01 REV A
AlliedWare Plus
TM
Operating System - Version 5.4.4C
64.25
Corrupt Agent
Option
The number of incoming DHCP Reply messages dropped
due to a corrupt relay agent information option field.
Note that Agent Option counters only increment on errors
occurring if the
command is
configured for an interface. Messages generating the errors
are only dropped if the
command is configured on the interface as well
as the
command.
Missing Agent
Option
The number of incoming DHCP Reply messages dropped
due to a missing relay agent information option field.
Note that Agent Option counters only increment on errors
occurring if the
command is
configured for an interface. Messages generating the errors
are only dropped if the
command is configured on the interface as well
as the
command.
Bad Circuit ID
The number of incoming DHCP Reply messages dropped
due to a bad circuit ID.
Note that Agent Option counters only increment on errors
occurring if the
command is
configured for an interface. Messages generating the errors
are only dropped if the
command is configured on the interface as well
as the
command
Missing Circuit ID
The number of incoming DHCP Reply messages dropped
due to a missing circuit ID.
Note that Agent Option counters only increment on errors
occurring if the
command is
configured for an interface. Messages generating the errors
are only dropped if the
command is configured on the interface as well
as the
command
Bad Remote ID
The number of incoming DHCP Reply messages dropped
due to a bad remote ID.
Note that Agent Option counters only increment on errors
occurring if the
command is
configured for an interface. Messages generating the errors
are only dropped if the
command is configured on the interface as well
as the
command
Missing Remote ID
The number of incoming DHCP Reply messages dropped
due to a missing remote ID.
Note that Agent Option counters only increment on errors
occurring if the
command is
configured for an interface. Messages generating the errors
are only dropped if the
command is configured on the interface as well
as the
command
Option Insert
Failed
The number of incoming DHCP Request messages dropped
due to an error adding the DHCP Relay Agent information
(option-82). This counter increments when:
■
the DHCP Relay Agent is set to drop packets with the
DHCP Relay Agent Option 82 field already filled by
another DHCP Relay Agent. This policy is set with the
command.
■
there is a packet error that stops the DHCP Relay Agent
from being able to append the packet with its DHCP
Relay Agent Information Option (Option 82) field.
Table 64-2: Parameters in the output of the show counter dhcp-relay
Parameter
Description